- Standard R32 VRF module (FDC-KXZVE3) with a cooling range from 44.8 kW to 67.0 kW - 2 outdoor units combination - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 67 for large sizes) - Wide range of controls, central controls and BMS systems are available

- Standard R32 VRF module (FDC-KXZVE3) with a cooling range from 72.8 kW to 100.5 kW - 3 outdoor units combination - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 80 for large sizes) - Wide range of controls, central controls and BMS systems are available

- Standard R32 VRF module (FDC-KXZE3) with a cooling range from 22.4 kW to 33.5 kW - Single Module - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 33 for large sizes) - Wide range of controls, central controls and BMS systems are available

Reversible heat pump, water source with refrigerant type R410A

Water to water heat pump, reversible on hydraulic side with refrigerant type R410A

Interland Techniek Central Heating

Radiators by Radson

Equipments from Raminex

RAC Single system - Outdoor Unit - Connectable with wall mounted indoor unit Standard series (ZSP) - Design flexibility optimised with a compatible piping length up to 25 m (size 45/50) and up to 15 m (sizes 25/35) - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating) - Product range available with R32 (-W1) and R410A (-S) refrigerants

RAC Multi system - Outdoor Unit (R32) - High energy efficiency with the use of R32 refrigerant (A+++ in cooling, A++ in heating) - Flexibility of installation with a total pipe length of 30 m and up to 2 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels - Wide range of operation down to -15 degC in heating and up to 46 degC in cooling

Heat pump hyper inverter - Outdoor unit - The Hyper Inverter range (high efficiency) offers products from 2 to 6 kW in cooling mode - Advanced technologies contributing to environmental protection, compatible with R32 (-W) and R410A (-S) - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels A++ - Wide range of operation down to -20 degC in heating and up to 46 degC in cooling - Design flexibility optimised with a compatible piping length up to 30 m (sizes 40, 50, 60) and up to 25 m (sizes 20, 25 and 35)

RAC Multi system - Outdoor Unit (R32) - High energy efficiency with the use of R32 refrigerant (A+++ in cooling, A++ in heating) - Flexibility of installation with a total pipe length of 40 m and up to 3 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels - Wide range of operation down to -15 degC in heating and up to 46 degC in cooling

Hydrolution EZY - Heat pump standard inverter outdoor unit (R32) - Monobloc Air to Water Heat Pump - Suitable for domestic applications - Ready for heating, cooling and hot water production (separate tank required) - Environmentally friendly with a LOT1 energy class of A+++ - Possible to connect system in cascade with up to 8 outdoor units (Accessory required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready)

Pipes and fittings from RacMet inoxPRES

RacMet AESPRES UNIKO GAS

RacMet AESPRES UNIKO

Pipes and fittings for RacMet INOXPRES UNIKO

Plant room equipment by Ubel

Esta Rohr Simplesta ST M

Pipes and fittings for RacMet steelPRES

Pipes and fittings for RacMet MARINEPRES

Pipes and fittings from RacMet AESPRES

Pipes and fittings from RacMet inoxPRES STEAM

Pipes and fittings from RacMet inoxPRES GAS

Pipes and fittings from RacMet AESPRESGAS

Pipes and fittings from RacMet inoxPRES HT

Esta Rohr Simplesta SH M

Monobloc air-water inverter heat pump (R290)

Monobloc air-water inverter heat pump (R290)

Water-cooled Full DC inverter heat pump system

OU 2 pipes - Top Discharge

Water to water heat pump, reversible on the hydraulic side with refrigerant type R134a

Water to water heat pump, reversible on the hydraulic side with refrigerant type R513A

Reversible unit, air source for indoor installation with refrigerant type R410A

SANHA Heavy Steel Press

Cylinder unit powered via outdoor unit

Heat pump outdoor unit

Cylinder unit powered via outdoor unit

Cylinder unit powered via outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Hydrobox powered via outdoor unit

Heat pump outdoor unit

Hydrobox powered via outdoor unit

Hydrobox powered via outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

WavinTigris K5 / M5

Sprinkler fittings

Piping system from Wavin Hep2O

Alfea Extensa Duo 3 - 10

Alfea Extensa 5 - 10

Mercuria Ace Monoblock E 4-16 indoor unit

Outdoor unit heat pump monoblock

Mercuria Ace Monoblock H 4-16 indoor unit

Outdoor unit heat pump monoblock

The PVT heatpump is specifically designed by Triple Solar for PVT heat pump panels.

Reversible air/water heat pump for outdoor installation with refrigerant type R410A

Air/water heat pump, INTEGRA family for outdoor installation with refrigerant type R410A

Reversible unit, air source for indoor installation with refrigerant type R410A

WOYA-080KLT

WOYA-100KLT

WOYA-060KLT

Heat pump - Hydraulic tower (air/water), Indoor unit must be combined with VWL ..5/5 AS… You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump accessory, Hydraulic tower can be combined with VWL ..5/6 A .. You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump accessory, Hydraulic station can be combined with VWL ..5/6 A .. You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump (all heat sources), with integrated DHW storage You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump (air/water), Outdoor unit must be combined with VWL ..8/5 IS... or VWL ..7/5 IS… You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump (all heat sources) You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump accessory, Hydraulic station can be combined with VWL ..5/5 AS … You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Heat pump (air/water), Monobloc You can combine your heat pump with the following controllers: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) or VWZ AI.

Press fittings of Henco

Air conditioner - outdoor unit Outdoor unit must be combined with VAM1-…KNI or …CNI or …DNI

Air conditioner - Single split outdoor unit Outdoor unit must be combined with indoor unit VAIB1-... WNI with the same cooling capacity.

SANHA ACR Copper Press

Hydrobox powered via outdoor unit

Hydrobox powered via outdoor unit

Hydrobox powered via outdoor unit

Valves and controls by Belimo

FTC5 hydrobox for ecodan split units

Pipes and fittings ABS line, by Georg Fischer

FTC5 hydrobox for ecodan split units

Radiators of Stelrad

Heat pump outdoor unit

Radiators of Henrad

Heat pump outdoor unit

Pipes and fittings from VSH SmartPress

Water/water heat pump, reversible on the hydraulic side with refrigerant type R513A

Water/water heat pump, reversible on the hydraulic side with refrigerant type R513A

VSH Valves

Pipes and fittings

Air-Water Heat Pump

Air-Water Heat Pump

Cylinder unit for ecodan