Noticias

Septiembre 2021
loading...

New chapter in ACV’s history

In 1922, the Belgian company ACV was founded with the dream of providing warmth and comfort to people around the world. Over the last century, ACV evolved into an international industry leader in the manufacturing and supply of quality stainless steel hot water equipment, with flagship technologies such as Tank-in-Tank and HeatMaster.

In August 2018, ACV was acquired by Groupe Atlantic, enabling it to reach new heights and seize new business opportunities, by opening up to previously unexplored markets.

To mark this important new chapter in ACV’s history, and to celebrate in 2022 one hundred years of existence as a brand, ACV updated its company logo and modernized its branding. This change was an evolution rather than a revolution, to show the world that ACV remains true to its DNA, while at the same time embarking on new business ventures.

The new ACV logo is a symbol of stability, craftsmanship and knowhow, all represented by a drop of water sheltering a flame, to convey excellence in hot water solutions.

The BIM content offering of ACV has recently been expanded. Discover the ACV product ranges on MEPcontent.com
loading...

Soil and waste systems quite as a whisper with the Master 3 Plus

Get access to 170 products of Pipelife Master3+ by using Stabicad.

Water discharge pipes are an essential component in all building structures, but they can sometimes be noisy and disruptive. The new Pipelife premium sound-insulated piping systems, known as the Master 3 Plus, meet this challenge head on.

The Master 3 Plus reduces noise generated by vibrations, which has been successfully tested at the Fraunhofer Institute in Germany. Results show that these characteristics make Master 3 Plus Systems quieter than any other sound-absorbing soil and waste piping system on the market. The comparison is based on values published by the producers.

About Pipelife


Pipelife is one of the largest manufacturers of plastic piping and fittings in Europe. Since 1947 it develops, manufactures and supplies a complete trendsetting program completely focused on the needs of Dutch and International customers.

It is our mission to provide sustainable solutions for all streams of water and energy. Regardless of the type of product, we guarantee an optimal value for money according to your wishes and plans. And of course great to work with.
loading...

All distributors from Robot Floor Heating are available on MEPcontent!

Since 1988, Robot has been manufacturing distributors and supplying all of the products required for a comprehensive underfloor heating installation. The distributors are produced fully automatically using the most modern techniques. We are proud of the fact that Robot manufactures distributors in the Netherlands. Robot also supplies calculations, installation plans, pipe, controls, and fixing materials.

Read the full article here
loading...

How BIM helps with Wkb according to Ubbink

"At the moment, not every contractor or installer is aware of it." "However, starting in mid-2022, an independent quality assurance agency will examine whether all building plans and work meet the set requirements," explains Mark Bloem, Ubbink's Project Manager Sales. "A file must then be created as part of the Quality Assurance for Building Act (Wkb)." But, as a contractor or installer, how do you go about doing that? Working in BIM can assist you in achieving this."

Read more
loading...

Structure and standards in BIM: an absolute necessity

BIM promises a future where all parties can collaborate by sharing project information from initial design through costing, build, delivery and ongoing operations. According to Trimble MEP’s Charles M.E. Lekx, real value can only be achieved when all parties across the construction sector operate in accordance with the same industry standards.

Growing BIM adoption and a need for uniformity within the construction industry worldwide have led to various public and private initiatives to develop standards that overlap in places. Harmonisation will be required as the opportunities for collaboration increase. Well-known standards in the UK and Ireland include ETIM and ETIM MC (European Technical Information Model), the Uniclass 2015 classifications, and the uniform GTIN code, also known as EAN / UPC issued by GS1 and, within the electrotechnical sector, the widely used Luckins data standard.

Read the full article on BIM+
Julio 2021
loading...

Winners of the 2021 Digital Model Education Awards

We are proud to announce the winners of the 4th edition of the Trophees Education de la Maquette Numérique. The final presentations took place on Wednesday, June 30, 2021. The students presented their models via videoconference.

Read the article here in French
loading...

Ecodan heat pumps Mitsubishi Electric and more

Have you seen the latest products from Mitsubishi Electric yet? The range for the Benelux has been expanded again with, among others, the following series: Ecodan heat pumps (PUD, PUZ, ERPT, PAC, EHST) and the Vertical Lossnay air heaters.

Read the full article here in Dutch
loading...

Hemubo W-Techniek and Trimble - Integral cooperation

Nearly 95% of the content produced comes from Trimble's MEPcontent.com library and is deployed company-wide.

Anton Zvonaryov, as BIM Manager at Hemubo W-Techniek, implements available information in accordance with underlying standards in order to support the desired subsequent use.

Read the full article here in Dutch
loading...

New Caleffi content with US localization

New Caleffi content with US localization on MEPcontent.com!
The following series are now available for download - specifically for the United States - in RFA, DWG and IFC format: 290030 series, 520 series, 6000AS series, 6000AS series with flange, 6000A series and 574A series. Download them now!

Flowing Expertise
With our heating and plumbing solutions, we have been redesigning the comfort of the spaces we live and work in for over 60 years. This is thanks to the flow of expertise, technology, experience and innovations that we have acquired over the years by constantly exchanging ideas with our customers and suppliers. A flow that pushes boundaries, allowing us to constantly set the benchmark. A flow that allows us to always look one step ahead into the future.

About Caleffi
We are a leading Italian manufacturer of components for heating, air conditioning, plumbing and renewable energy systems, for civil and industrial usage, and supplier of state-of-the-art installations in the heat metering field too. The Caleffi Group has over 1340 employees worldwide and distributes to over 90 countries with a record turnover above 318 Million Euros in 2020.
loading...

The new SpiroVent Superior S250

The solution that even sounds perfect.
Even a dog won't notice it's there!
And now you can quietly download it from MEPcontent.com

The word is out about our vacuum degassing technology being quieter than ever. The almost silent secret is kept by our patented Venturi Loop, a speed-controlled centrifugal pump combined with a Venturi. A sensor continuously monitors the vessel pressure as degassing takes place, and the pump is adjusted accordingly. This ensures smooth pressure steps and accurate vessel pressure control. In real terms, this means very low resonance and barely discernible system noise. Just imagine a sound level of only 41dB(A)! Let’s not forget that expelling all the air from a system means there will be no air left to cause noisethere either.

Getting the right product first time right
The SpiroVent Superior S250 has been designed for light commercial applications, in other words, for smaller volume systems. Adding this product expands the degassing family, so that we can accommodate the growing demand from new systems which operate at lower temperatures.

It even sounds perfect... and that's just for starters

The SpiroVent Superior S250 is an automatic vacuum degasser. It removes dissolved and free gases from the system water in closed heating and cooling systems using Henry's laws principle. The great advantage of the SpiroVent Superior S250 is that no matter where it is installed it will remove air.

The only condition for the location of the S250 next to pressure is its working temperature range of 15-70°C. As a rule of thumb, the system return normally is a good point to install the SpiroVent Superior S250.

In addition a smooth degassing operation, there is more:
  • Low defect rate and replacement costs

  • Low service and maintenance required

  • High degassing performance


  • About Spirotech
    As the leading expert in system water quality, Spirotech developed reliable standard and customized solutions to boost performance and protect investments by helping save energy, increase comfort, reduce wear and tear and maximise the uptime of your HVAC system. Check out the Spirotech content offering on MEPcontent.com!
    loading...

    What's new: latest update of the Raccorderie Metalliche PLiP for Piping

    The App has been updated! The descriptions of the selection have been adapted. In the type description, the connection type and diameter/thread descriptions are added to the selection of the PLiP. And in the parts list (schedule) we added a material column. As a result, there is a better relationship between the documentation of Raccorderie Metalliche and the application. This makes it easier for engineers to order fitting materials.

    The free Raccorderie Metalliche Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized Raccorderie Metalliche content. Just click, draw, and the right fittings are automatically added to your piping system. In addition, if you want to make advanced connections with real-world fittings rather than using Revit’s custom fittings, it takes only a few clicks.
    Use the in-app predefined schedules and order your items directly from the material lists with a guaranteed up-to-date content.

    The following content is included in the App:

    • InoxPres

    • InoxPres Gas

    • InoxPres HT

    • InoxPres Steam

    • SteelPres

    • AESPres

    • AESPres Gas

    • MarinePres

    • Uniko
    loading...

    Updated, configurable content from IBMO, the sealing specialist for cable and pipe transits

    IBMO is specialized in fire resistant, gas and watertight sealing systems. The sealing systems are suitable for Industry, Building, Marine and Offshore.

    New are the Uniseal and Pressure seals, now also configurable in Revit.

    IBMO was asked by several customers whether seals could not be made configurable in Revit: this saves the engineer a considerable amount of time and work. This means that when the size of the pipe or the size of the hole in which it is placed changes, the seal is automatically adjusted to the correct type.

    MEPcontent's content engineers have managed to implement these changes, allowing you as an engineer to make your design much more efficiently and faster with the seals!

    The updated products also include instructional videos for configurable processing of the IBMO Uniseal and Pressure Seals.
    loading...

    Extensive update of the Jung Switch Range Configurator for Revit

    The free JUNG Switch Range Configurator App for Revit enables you to easily design, manage and configure complete sets of switch ranges, even for the largest BIM and MEP projects.

    Extensive update and new Spanish localization
    The App has been completely updated with new data and product ranges, including the AS, A, LS ranges and the WG600, WG800 and AP600 ranges. We've also added a new Spain localization in the Spanish language. Don’t wait any longer and download the App now!

    Always up-to-date
    Experiment with the variety of design options and functions with the correct annotation offered by this App to streamline your design in both 2D and 3D. Always up-to-date with the latest JUNG product data available in your country. Besides this, also the junction boxes from Attema can be easily added to new and existing configurations

    Reliable manufacturer data
    The Revit families contain up-to-date and reliable JUNG specific data, like article number, GTIN, and other relevant manufacturer data. Work only with articles available in your country and easily create Revit schedules with the latest product information and ready to order.

    Switch ranges in a few clicks
    Configure, place, and manage complete sets of switch ranges to meet the highest demands for quality and aesthetics. Even when working on linked models or architectural models.

    Variety in design and configuration
    The wide range of JUNG switches allows you to create perfect color combinations for frames and cover plates – it’s easy, just pick your favorite color! In addition, you can also choose how many elements (like switch, socket, dimmer, data or communication) your switch range should have, its orientation and mounting height.

    Choose from more than 30 functions
    Configuring a switch range is fast and easy: just choose a function for each element (like one pole or two way switch, socket with or without earth, loudspeaker, digital radio, and many more) of your switch range. And always get the correct annotation for each function in the floorplan.

    Add junction boxes
    Easily add junction boxes for the manufacturer Attema to new and existing switch range configurations. And you can also add additional spouts by simply clicking on one of the optional spout positions.

    Change your switch range at any time
    Want to adjust existing switch ranges? Just click on one of the components that you would like to change. It works even for multiple instances of the same configuration at once.

    Different hosting types
    You decide whether to insert a switch range on a face based surface like a wall, or non-hosted in free space.
    Junio 2021
    loading...

    ELCO aims to revolutionise the boiler market with innovative new design

    ELCO Heating Solution has implemented its commercial boiler range with the launch of two new ELCO Heating Solution has implemented its commercial boiler range with the launch of two new condensing ranges featuring the best possible efficiencies, the THISION® L PLUS wall-mounted range and the TRIGON® L PLUS floor-standing range. Read full article in Italian here
    loading...

    Information regarding an interface change on MEPcontent.com and MEPcontent manufacturer Apps

    We’d like to inform you of upcoming changes to MEPcontent.com and our MEPcontent manufacturer Apps. Our company Trimble is focused on continuing to invest in delivering best-in-class reliable, secure, and performant systems. As part of that effort, Trimble will update shortly the Trimble Identity (TID), the method in which you use to login to MEPcontent.com and our Apps. We expect this change to be finalized by the end of August 2021. After this update, you will be redirected to the standard Trimble login screen and you will be able to use your current log-in credentials as usual.